You’re getting a lot of downvotes, but in a better world this stuff would all be standard… Unfortunately I have no suggestions though
Remy Rose
I like knitting, math, and uplifting the proletariat.
Old account: @MxRemy@lemmy.one (if lemmy.one hasn’t died yet)
- 0 Posts
- 21 Comments
Remy Rose@piefed.socialto
3DPrinting@lemmy.world•Should I get a b*mbulab printer? + More newbie questionsEnglish
4·13 days agoThe bigger the print volume, usually the more finicky fine-tuning is. It’s just because there’s a lot more weight/belt path/etc for things to go wonky. But my makerspace’s 350mm³ machines have definitely come in clutch on occasion, even if the vast majority of our patrons’ requests are smaller.
For filaments, they’re MOSTLY all compatible everywhere, with just a couple exceptions:
- The defacto standard diameter is 1.75mm, but 2.85mm is still being made (mostly because of Ultimaker), so make sure you get the right size for your machine.
- If the material needs to be printed at higher than ~250C, you’ll need an all-metal hotend. The cheaper kind of hotend uses PTFE inside and that’ll start offgassing toxins above 250C.
- Some 3d printer brands have started putting RFID chips in their own line of filament, and making it difficult-to-impossible for the machine to accept anything but those. Bambulabs wants to do this SO BAD lol.
- If the filament itself offgases toxins, you’ll want an enclosed printer with some kind of filtration.
Also, I would say that the reputation Bambulabs has for being easy/plug-and-play is overblown. Not that other printers are any more plug-and-play, just that Bambulabs are no better. And when things inevitably DO go wrong with one, they’re harder and more expensive to fix. You wouldn’t believe how many of our 3d printing patrons sheepishly admit “actually I have a printer at home but it’s broken right now” or “I couldn’t get it to do this print”. One guess which printer they usually have.
Remy Rose@piefed.socialto
3DPrinting@lemmy.world•What extruder to choose for a replacement for a broken Afterburner on a Voron 2.4?English
2·13 days agoThe v1 is so freaking good that I have full faith v2 is worth going for. Unfortunately I don’t have any experience with either of the extruders it supports, but if I were picking one I’d go Orbiter.
Remy Rose@piefed.socialto
3DPrinting@lemmy.world•What extruder to choose for a replacement for a broken Afterburner on a Voron 2.4?English
2·14 days agoWhoaa, I didn’t know there was a version 2 of the A4T!! Does this one not support the G2WW extruder? The first version does, and I’ve been greatly enjoying that. If it does, that’s what I’d go with.
Remy Rose@piefed.socialto
DeGoogle Yourself@lemmy.ml•Google bussness hours and reviews are finally getting SOME sort of competitionEnglish
4·20 days agoOooh i gotta get on this, time to review all my favorite local spots 👌
Orca, but Preflight is definitely growing on me! It’s got some really unique stuff
Remy Rose@piefed.socialto
3DPrinting@lemmy.world•Finally got the Box Turtle AFC mostly dialed in, yay multicolor!English
2·1 month agoColorFabb claims that it is, but I’ve never looked into it! It’d be nice to know
EDIT: found a comment from the person who makes the Ecogenesis stuff, about testing the UV resistance of another brand (Beyond Plastic, now defunct).
Remy Rose@piefed.socialto
3DPrinting@lemmy.world•Finally got the Box Turtle AFC mostly dialed in, yay multicolor!English
1·1 month agoYou must have your stuff pretty well dialed in then, congrats! We don’t get like a lot of jams, but since we print for so many patrons, the machines are just kinda always running. So it’s relatively rare, but it still happens
Remy Rose@piefed.socialto
3DPrinting@lemmy.world•Finally got the Box Turtle AFC mostly dialed in, yay multicolor!English
2·1 month agoIt depends I guess. How many different types of material are you switching between, and how often? We commonly use PLA, PHA, ABS, ASA, HIPS, PETG, TPU, PP-GF, PA-CF, BVOH, and occasionally a few others/composites/etc. Some of them really don’t play nice with each other either.
Remy Rose@piefed.socialto
3DPrinting@lemmy.world•Finally got the Box Turtle AFC mostly dialed in, yay multicolor!English
2·2 months agoI love it, yeah. There are some hiccups, don’t get me wrong… it warps as bad as ABS, and not many people sell the pure stuff. But:
- It’s non-toxic.
- It’s biodegradable.
- It smells really nice! kinda like… play-doh?
- It’s realllyyy strong!
- It’s got this weird-but-nice texture, almost more leather than plastic.
- It never jams my hotend.
Remy Rose@piefed.socialto
3DPrinting@lemmy.world•Finally got the Box Turtle AFC mostly dialed in, yay multicolor!English
2·2 months agoAgreed lol, “Taco Cat Goat” sounds like something a bougie gourmet SoHo cheesemaker would make. I bet it’d be good on a pizza though
Remy Rose@piefed.socialto
3DPrinting@lemmy.world•Finally got the Box Turtle AFC mostly dialed in, yay multicolor!English
7·2 months agoPHA seems to work pretty well in the AFC. It’s not super prone to shattering into a million pieces, the way some materials can be (especially when old and/or moist). The only notable issue is that, due to the very slow hardening, sometimes the “kick” procedure breaks the purge in half instead of knocking it into the purge bucket. I think I just need to add a “dwell” command to the macro between purge and kick, to give it a little more time.
The yellow and black filaments are both from the “Terraform” line of PHA by HartSmart, who I’m pretty sure is sourcing their base materials from EcoGenesis. The pink filament is from the “LooPHA” line by PHA Eco Goods, and is blended with real sakura blossoms.
Also, the Box Turtle is the only AFC I’ve ever built, so I don’t have anything for comparison, but… it was awful!! What terrible tolerances on those printed parts! Honestly quite surprised I ever got it working at all, let alone this well.
I feel like I definitellyyy saw a CMYK printer in a VOD of some printing convention a couple years ago? It was presented by some company and looked huge and expensive, wish I could remember who they were.
Maybe something to do with your max volumetric flow rate? Could cap that lower and see if anything changes with the 0.4mm
Remy Rose@piefed.socialto
3DPrinting@lemmy.world•You Can't Buy Airless MTB Tires—So I Made Them!English
8·4 months agoOooh, if that algae-derived TPE would just hit the market already… 😍
Remy Rose@piefed.socialto
3DPrinting@lemmy.world•Back with an update on my previous postsEnglish
2·4 months agoDefinitely, our Vorons have spoiled me lol
Remy Rose@piefed.socialto
3DPrinting@lemmy.world•Back with an update on my previous postsEnglish
2·4 months agoI did and I even agree! Ours just seems to be a bit of an anomaly, or else we’re just way too tolerant of jank lol. Definitely wouldn’t get a second printer from them
Remy Rose@piefed.socialto
3DPrinting@lemmy.world•Back with an update on my previous postsEnglish
1·4 months agoWe have an ancient Ender 5 Pro in the library makerspace that’s running pretty much constantly, and it was already well used when it first got donated to us. Granted, it’s farrrrrr from our best printer, but it’s pretty reliable! I barely even maintain or upgrade the thing lol
Remy Rose@piefed.socialto
3DPrinting@lemmy.world•Prusament launches "PA11 Natural" filament- plant based PA nylon without fiber fill for mechanical partsEnglish
2·4 months agoThat’s what I was thinking about saying too… They’re probably still mostly right, in the sense that this is a company and companies are almost always primarily concerned with their profit margin, not the environment. However like you said, most things now are made out of plastic, most plastics are made from fossil fuels, and fossil fuels need to be retired like yesterday.

That’s not entirely untrue, fair 😅
I do wish conditions like these were more obtainable though… It all seems like stuff that people on the earlier internet would assume was the norm by now.